From Wikipedia, the free encyclopedia
Grid computing is a phrase in distributed computing which can have several meanings:
-A local computer cluster which is like a "grid" because it is composed of multiple nodes.
-Offering online computation or storage as a metered commercial service, known as utility computing, computing on demand, or cloud computing.
-The creation of a "virtual supercomputer" by using spare computing resources within an organization.
-The creation of a "virtual supercomputer" by using a network of geographically dispersed computers. Volunteer computing, which generally focuses on scientific, mathematical, and academic problems, is the most common application of this technology.
These varying definitions cover the spectrum of "distributed computing", and sometimes the two terms are used as synonyms. This article focuses on distributed computing technologies which are not in the traditional dedicated clusters; otherwise, see computer cluster.
Functionally, one can also speak of several types of grids:
-Computational grids (including CPU Scavenging grids) which focuses primarily on computationally-intensive operations.
-Data grids or the controlled sharing and management of large amounts of distributed data.
-Equipment grids which have a primary piece of equipment e.g. a telescope, and where the surrounding Grid is used to control the equipment remotely and to analyze the data produced.
Grids versus conventional supercomputers
----------------------------------------------------------------
"Distributed" or "grid computing" in general is a special type of parallel computing which relies on complete computers (with onboard CPU, storage, power supply, network interface, etc.) connected to a network (private, public or the Internet) by a conventional network interface, such as Ethernet. This is in contrast to the traditional notion of a supercomputer, which has many CPUs connected by a local high-speed computer bus.
The primary advantage of distributed computing is that each node can be purchased as commodity hardware, which when combined can produce similar computing resources to a many-CPU supercomputer, but at lower cost. This is due to the economies of scale of producing commodity hardware, compared to the lower efficiency of designing and constructing a small number of custom supercomputers. The primary performance disadvantage is that the various CPUs and local storage areas do not have high-speed connections. This arrangement is thus well-suited to applications where multiple parallel computations can take place independently, without the need to communicate intermediate results between CPUs.
The high-end scalability of geographically dispersed grids is generally favorable, due to the low need for connectivity between nodes relative to the capacity of the public Internet. Conventional supercomputers also create physical challenges in supplying sufficient electricity and cooling capacity in a single location. Both supercomputers and grids can be used to run multiple parallel computations at the same time, which might be different simulations for the same project, or computations for completely different applications. The infrastructure and programming considerations needed to do this on each type of platform are different, however.
There are also differences in programming and deployment. It can be costly and difficult to write programs so that they can be run in the environment of a supercomputer, which may have a custom operating system, or require the program to address concurrency issues. If a problem can be adequately parallelized, a "thin" layer of "grid" infrastructure can cause conventional, standalone programs to run on multiple machines (but each given a different part of the same problem). This makes it possible to write and debug programs on a single conventional machine, and eliminates complications due to multiple instances of the same program running in the same shared memory and storage space at the same time.
Design considerations and variations
----------------------------------------------------------------
One feature of distributed grids is that they can be formed from computing resources belonging to multiple individuals or organizations (known as multiple administrative domains). This can facilitate commercial transactions, as in utility computing, or make it easier to assemble volunteer computing networks.
One disadvantage of this feature is that the computers which are actually performing the calculations might not be entirely trustworthy. The designers of the system must thus introduce measures to prevent malfunctions or malicious participants from producing false, misleading, or erroneous results, and from using the system as an attack vector. This often involves assigning work randomly to different nodes (presumably with different owners) and checking that at least two different nodes report the same answer for a given work unit. Discrepancies would identify malfunctioning and malicious nodes.
Due to the lack of central control over the hardware, there is no way to guarantee that nodes will not drop out of the network at random times. Some nodes (like laptops or dialup Internet customers) may also be available for computation but not network communications for unpredictable periods. These variations can be accommodated by assigning large work units (thus reducing the need for continuous network connectivity) and reassigning work units when a given node fails to report its results as expected.
The impacts of trust and availability on performance and development difficulty can influence the choice of whether to deploy onto a dedicated computer cluster, to idle machines internal to the developing organization, or to an open external network of volunteers or contractors.
In many cases, the participating nodes must trust the central system not to abuse the access that is being granted, by interfering with the operation of other programs, mangling stored information, transmitting private data, or creating new security holes. Other systems employ measures to reduce the amount of trust "client" nodes must place in the central system such as placing applications in virtual machines.
Public systems or those crossing administrative domains (including different departments in the same organization) often result in the need to run on heterogeneous systems, using different operating systems and hardware architectures. With many languages, there is a tradeoff between investment in software development and the number of platforms that can be supported (and thus the size of the resulting network). Cross-platform languages can reduce the need to make this tradeoff, though potentially at the expense of high performance on any given node (due to run-time interpretation or lack of optimization for the particular platform).
Various middleware projects have created generic infrastructure, to allow various scientific and commercial projects to harness a particular associated grid, or for the purpose of setting up new grids. BOINC is a common one for academic projects seeking public volunteers; more are listed at the end of the article.
CPU scavenging
----------------------------------------------------------------
CPU-scavenging, cycle-scavenging, cycle stealing, or shared computing creates a "grid" from the unused resources in a network of participants (whether worldwide or internal to an organization). Usually this technique is used to make use of instruction cycles on desktop computers that would otherwise be wasted at night, during lunch, or even in the scattered seconds throughout the day when the computer is waiting for user input or slow devices.
Volunteer computing projects use the CPU scavenging model almost exclusively.
In practice, participating computers also donate some supporting amount of disk storage space, RAM, and network bandwidth, in addition to raw CPU power. Nodes in this model are also more vulnerable to going "offline" in one way or another from time to time, as their owners use their resources for their primary purpose.
Current projects and applications
----------------------------------------------------------------
Grids offer a way to solve Grand Challenge problems like protein folding, financial modeling, earthquake simulation, and climate/weather modeling. Grids offer a way of using the information technology resources optimally inside an organization. They also provide a means for offering information technology as a utility for commercial and non-commercial clients, with those clients paying only for what they use, as with electricity or water.
Grid computing is presently being applied successfully by the National Science Foundation's National Technology Grid, NASA's Information Power Grid, Pratt & Whitney, Bristol-Myers Squibb, Co., and American Express.
One of the most famous cycle-scavenging networks is SETI@home, which was using more than 3 million computers to achieve 23.37 sustained teraflops (979 lifetime teraflops) as of September 2001.
As of May 2005, Folding@home had achieved peaks of 186 teraflops on over 160,000 machines.
Another well-known project is distributed.net, which was started in 1997 and has run a number of successful projects in its history.
The NASA Advanced Supercomputing facility (NAS) has run genetic algorithms using the Condor cycle scavenger running on about 350 Sun and SGI workstations.
United Devices operates the United Devices Cancer Research Project based on its Grid MP product, which cycle scavenges on volunteer PCs connected to the Internet. As of June 2005, the Grid MP ran on about 3,100,000 machines.
The Enabling Grids for E-sciencE project, which is based in the European Union and includes sites in Asia and the United States, is a follow up project to the European DataGrid (EDG) and is arguably the largest computing grid on the planet. This, along with the LHC Computing Grid (LCG) have been developed to support the experiments using the CERN Large Hadron Collider. The LCG project is driven by CERN's need to handle huge amounts of data, where storage rates of several gigabytes per second (10 petabytes per year) are required. A list of active sites participating within LCG can be found online as can real time monitoring of the EGEE infrastructure. The relevant software and documentation is also publicly accessible .
Thursday, August 23, 2007
Grid Computing
Posted by
pkm
at
1:45 AM
0
comments
Labels: computer, innovation, technology
Saturday, August 18, 2007
DVB-H
From Wikipedia, the free encyclopedia
DVB-H (Digital Video Broadcasting - Handheld) is a technical specification for bringing broadcast services to handheld receivers. DVB-H was formally adopted as ETSI standard EN 302 304 in November 2004. The DVB-H specification (EN 302 304) can be downloaded from the official DVB-H website. DVB-H is officially endorsed by the European Union.The major competitor of this technology is Digital Multimedia Broadcasting (DMB).
Technical explanation
---------------------------------------------------------------
It is the latest development within the set of DVB transmission standards. DVB-H technology is a superset of the very successful DVB-T (Digital Video Broadcasting - Terrestrial) system for digital terrestrial television, with additional features to meet the specific requirements of handheld, battery-powered receivers.
DVB-H can offer a downstream channel at high data rates which can be used as standalone or as an enhancement of mobile telecommunication networks which many typical handheld terminals are able to access anyway.
Time slicing technology is employed to reduce power consumption for small handheld terminals. IP datagrams are transmitted as data bursts in small time slots. Each burst may contain up to 2 Mbits of data (including parity bits). There are 64 parity bits for each 191 data bits, protected by Reed-Solomon codes. The front end of the receiver switches on only for the time interval when the data burst of a selected service is on air. Within this short period of time a high data rate is received which can be stored in a buffer. This buffer can either store the downloaded applications or playout live streams.
The achievable power saving depends on the relation of the on/off-time. If there are approximately ten or more bursted services in a DVB-H stream, the rate of the power saving for the front end could be up to 90%. DVB-H is a technical system which was carefully tested by the DVB-H Validation Task Force in the course of 2004 (see ETSI Technical Report TR 102 401).
Frequencies
---------------------------------------------------------------
DVB-H is designed to work in the following bands:
-VHF-III (170-230 MHz, or a portion of it)
-UHF-IV/V (470-862 MHz, or a portion of it)
-L (1.452-1.492 GHz)
DVB-H can coexist with DVB-T in the same multiplex.
DVB-IPDC
---------------------------------------------------------------
The set of DVB specifications for IP Datacasting (DVB-IPDC) can most simply be described as the essential components required to deploy a commercial mobile TV service based on Internet Protocol. DVB-IPDC is a set of systems layer specifications originally designed for use with the DVB-H physical layer, but that will ultimately be used as a higher layer for all DVB mobile TV systems, including DVB-SH, and indeed as a higher layer for any other IP capable system.
In short, with regard to mobile TV, these specifications define what is delivered, how it is delivered, how it is described, and how it is protected. They cover system architecture, use cases, DVB PSI/SI signalling, electronic service guide (ESG), content delivery protocols (CDP), and service purchase and protection (SPP). Almost all of these have now been published as formal ETSI standards. The full set of DVB-IPDC specifications is available from dvb-h.org.
DVB-SH
---------------------------------------------------------------
DVB-SH (satellite services to handheld devices) is a hybrid (satellite/terrestrial) standard derived from DVB-H and ETSI SDR. A similar architecture is already being used in S-DMB, XM Satellite Radio, Sirius Satellite Radio, MobaHo! but DVB-SH promises to be more powerful. The envisaged system incorporates a high power geostationary satellite for outdoor and light indoor coverage integrated with a terrestrial repeater (low power gap-filler) network for indoor coverage in urban areas.
Alcatel-Lucent expects to deliver DVB-SH terrestrial repeaters in 2007. Eutelsat and SES ASTRA plan to launch an S-band satellite covering Europe in 2009. DVB-SH satellite services will become operational in 2009 but maybe DVB-SH operations will start earlier with terrestrial networks in certain regions of the world. Chip maker DiBcom is designing a chipset that will be compatible with the DVB-H standard working in the S-Band, Sagem is developing DVB-H phones that support both UHF and S-Band. It's an official DVB Project standard. The DVB Technical Module launched a Study Mission on SSP (Satellite Services to Portable Devices) and in June 2006 TM-SSP started to develop standards. The DVB Project approved the definitive standard in February 2007.
French Agence de l'innovation industrielle is now financing this effort through TVMSL, a project led by Alcatel-Lucent that plans to develop a DVB-SH standard suitable for hybrid satellite and terrestrial transmission. Other partners involved in TVMSL are Sagem, Alenia, RFS, Philips, DiBcom, TeamCast, UDcast, CNRS, INRIA, CEA-LETI.
DVB-H2
---------------------------------------------------------------
A study mission on a possible DVB-H2 system is due to commence in 2007 which could produce a finalized specification in 2008. It is not unthinkable that DVB-H2 and DVB-T2 specifications will be interrelated systems.
Service launches
---------------------------------------------------------------
In Albania, DigitALB launched nationwide Service on 20 December 2006 with the product commercially available from 21 April 2007.
In Finland, the license to operate a DVB-H network was awarded to Digita in March 2006. In May 2006 they announced that they had signed a contract with Nokia to use its DVB-H platform for the service. The network was supposed to be launched on the 1st December 2006, but disagreements regarding copyrights of the broadcasted material have stalled the launch. Among the services available will be Voice TV and Kiss digital radio.Initially the network should cover 25% of the population with coverage area Helsinki, Oulu and Turku. Mobiili-TV started commercial services on May 10 2007.
In India, Indian public broadcaster Prasar Bharti (also known as DD for Doordarshan) has teamed with Nokia to start a DVB-H. And trial is going in various metropolitan areas to test the reception quality of the broadcast coverage. Moreover, DD is currently broadcasting 8 channels in the New Delhi.
In Italy, 3 Italia launched nationwide services in May 2006, both Telecom Italia Mobile (TIM) and Mediaset in June 2006, Vodafone in December 2006.
In Singapore, TVMobile uses DVB technology to broadcast live news, entertainment and music content directly to over 1500 Singapore Bus Service buses islandwide, along with various other indoor and outdoor locations.
In the United States, a nationwide service will be rolled out by Modeo a company owned by Crown Castle. The service will begin in 2006 in New York City and will roll out to the top thirty markets in the USA during 2007. Modeo owns 5 MHz of spectrum nationwide at 1600 MHz. At the NAB trade show in April 2006, a second service launch was announced by SES Americom and Aloha Partners. Titled Hiwire Mobile Television, the service is set to begin trials in Las Vegas in Q4 2006. Hiwire owns two 6 MHz channels of spectrum at 700 MHz covering most of the country.
In Vietnam, VTC launched nationwide service on 21 December 2006.
O2 Ireland commenced a trial in March 2007 with a single high site 1.2 kW transmitter at Three Rock covering the greater Dublin area.
In France, Spain and South Africa nationwide service launch is planned for 2007, in Austria, Germany and Switzerland for 2008.
In China two companies have been issued licenses by the government, Shanghai Media Group and China Central Television. Trials are currently underway, with service launch expected before the 2008 Beijing Olympics.
Posted by
pkm
at
3:44 AM
0
comments
Tuesday, August 14, 2007
iMac
From Wikipedia, the free encyclopedia
The iMac is a desktop computer designed and built by Apple, Inc. It has been a large part of Apple's consumer desktop offerings since its introduction in 1998 and has evolved through three distinct forms. In its original form, the G3, the iMac was egg-shaped with a CRT monitor and was mainly enclosed by colored, translucent plastic. The second major revision, the G4, moved to a design of a hemispherical base containing all the main components and an LCD monitor on a freely-moving arm attached to the top of the base. The iMac G5 and the Intel iMac placed all the components immediately behind the monitor, creating a slim design which tilts only up and down on a simple metal base. The current iMac shares the same form as the previous models but is now thinner and uses aluminum and glass for its case.
The machine enjoys a relatively high profile in popular culture due to its distinctive aesthetics and Apple's successful marketing. The iMac and other Macintosh computers can also be seen in various movies, commercials, and TV shows (both live action and animated) due to their wide use in video editing/film production.
The iMac has also received considerable critical acclaim, including praise from technology columnist Walt Mossberg as the “Gold Standard of desktop computing;” Forbes Magazine described the original candy-colored line of iMac computers as being an “industry-altering success”. The original 24" Core 2 Duo iMac received CNET's “Must-have desktop” in their 2006 Top 10 Holiday Gift Picks.
Popular culture
-----------------------------------------------
The announcement of the iMac initially caused considerable buzz among commentators, Mac fans, and detractors in the press and on websites. Opinions were polarized over Apple’s drastic changes to the Macintosh hardware. At the time, Apple was revamping its retail strategy to improve the Mac purchasing experience. Apple famously declared that “the back of our computer looks better than the front of anyone else’s.” The distinctive aesthetics were easily spotted in public. The iMac was recognizable on television, in films and in print. This increased Apple’s brand awareness, and embedded the iMac into popular culture. When released, the iMac was one of the best selling computers in the U.S. and Japan for months, and Apple was unable to meet demand.
Apple declared the ‘i’ in iMac to stand for ‘Internet’. Attention was given to the out-of-box experience: the user needed to go through only two steps to set up and connect to the Internet. “There's no step 3!” was the catch-phrase in a popular iMac commercial narrated by actor Jeff Goldblum. Another commercial, dubbed ”Simplicity Shootout”, pitted seven-year-old Johann Thomas and his border collie Brodie, with an iMac, against Adam Taggart, a Stanford University MBA student, with a Hewlett-Packard Pavilion 8250, in a race to set up their computers. Johann and Brodie finished in 8 minutes and 15 seconds, whereas Adam was still working on it by the end of the commercial. Apple later adopted the ‘i’ prefix across its consumer hardware and software lines, such as the iPod, iBook, iPhone, iLife, iPhoto, iMovie, iDVD, iTunes, iWeb, iWork, iSight, iChat, iCal, and iSync. The prefix has caught on for non-Apple products as well. This caused a problem when the long rumored Apple phone was dubbed in the media as the iPhone, a name already taken by a Cisco product. In the end, Apple came to an agreement with Cisco, although details of the deal were not disclosed.
Apple’s use of translucent candy-colored plastics inspired similar designs in other consumer electronics. For example, grilling machines, portable electronics, pencil sharpeners, video game consoles and peripherals (including the Nintendo 64, which was released in special edition ‘Funtastic’ colors) featured the translucent plastic. Apple’s introduction of the iPod, iBook, and iMac G4, all featuring snowy white plastic, inspired similar designs in consumer electronic products. The color rollout also featured two distinctive ads: ‘Life Savers’ color scheme was based upon the Rolling Stones song She's a Rainbow and the white advert had Cream’s White Room, specifically its introduction, as its backing track.
USB
-----------------------------------------------
The original iMac was the first Macintosh computer to include a USB port. In fact, USB was the only peripheral interface built into the original iMac; Apple dropped legacy ports such as the Apple Desktop Bus and SCSI in favor of the newer interface. Although USB was invented by Intel and was also available on PCs at the time, the iMac’s popularity and sole dependence on USB helped popularize the interface among third party peripheral makers, as evidenced by the many early USB peripherals that were made of translucent colored plastic to match the color schemes of the original iMac. Via the USB port, hardware makers could make products compatible with both PCs and Macs. This has allowed Macintosh users to use a large selection of inexpensive devices, such as hubs, scanners, storage devices and mice. After the iMac, Apple continued to remove legacy peripheral interfaces and floppy drives from the rest of its product line.
The successful iMac allowed Apple to continue targeting the Power Macintosh line at the high-end of the market. This foreshadowed a similar strategy in the notebook market, when the iBook was released in 1999. Since then, the company has continued this strategy of differentiating the consumer versus professional product lines. Apple's focus on design has allowed each of its subsequent products to create a distinctive identity. Apple derided the beige colors pervading the PC industry. The company would later use anodized aluminium, and white, black and clear polycarbonate plastics.
Legal action
-----------------------------------------------
Apple protected the iMac design with aggressive legal action against computer makers who made imitations, such as eMachines’ eOne. Some manufacturers added translucent plastics to existing designs. In 1999, Apple obtained the domain name www.appleimac.com from Abdul Traya, after legal intervention.
Timeline of iMac models
-----------------------------------------------
Posted by
pkm
at
12:13 AM
0
comments
Monday, August 13, 2007
UltraSPARC T2
From Wikipedia, the free encyclopedia
Sun Microsystems' UltraSPARC T2 microprocessor, is a multithreading, multi-core CPU. It is the successor to the UltraSPARC T1. The chip is sometimes referred to by the codename Niagara II. Sun plans to start selling servers with the T2 processor in Q3 2007.
New Features
----------------------------------------------------
The T2 is a commodity derivative of the UltraSPARC series of microprocessors, targeting internet workloads in computers, storage and networking devices. The processor, manufactured in 65 nm, is available with eight CPU cores, and each core is able to handle eight threads concurrently. Thus the processor is capable of processing up to 64 concurrent threads. Other new features include:
-Speed bump for each thread, increased to 1.4 GHz from 1.2 GHz
-one PCI Express port (x8 1.0)
-two 10 Gigabit Ethernet ports with packet classification and filtering
-the L2 cache size increased to 4 MB (8-banks, 16-way associative)
-improved thread scheduling and instruction prefetching to achieve higher single-threaded performance
-two integer ALUs per core instead of one, each one being shared by a group of four threads
-one floating point unit per core, up from just one FPU per CPU
-eight encryption engines (instead of just one in T1), with each supporting DES, 3DES, AES, RC4, SHA1, SHA256, MD5, RSA-2048, ECC, CRC32
-four dual-channel FBDIMM memory controllers
The UltraSPARC T2 is the first major processor whose blueprints are available under a free software license, namely the GPL.
Virtualization
-----------------------------------------------------
Like the T1, the T2 also supports the Hyper-Privileged execution mode. The SPARC Hypervisor runs in this mode, and it can partition a T2 system into 64 Logical Domains, each of which can run an operating system instance.
Tape-Out
-----------------------------------------------------
On April 12, 2006, Sun announced the tape-out completion of the T2. It also disclosed that under the same power envelope, the T2 will deliver twice the performance of the T1 when running transactional workload.
Announcement webcast Sun announced the UltraSPARC T2 on 7 August 2007. It is now being billed "The world's fastest microprocessor."
Performance Improvement: T2 vs. T1
-----------------------------------------------------
-Integer throughput and throughput/watt (>2x improvement)
-Integer single-thread performance (>1.4x improvement)
-Better floating-point throughput (>10x improvement)
-Better floating-point single-thread performance (>5x improvement)
Power consumption
-----------------------------------------------------
Peak power consumption can go as high as 123 watts, but the T2 typically consumes 95 watts during nominal system operation. This is up from 72 watts from the T1, but Sun explains that this is due to a higher degree of system integration onto the chip.
Posted by
pkm
at
11:53 PM
0
comments
Sunday, August 12, 2007
iPhone
From Wikipedia, the free encyclopedia
The iPhone is a multimedia and Internet-enabled quad-band GSM EDGE-supported mobile phone designed and sold by Apple Inc. The iPhone's functions include those of a camera phone and a multimedia player, in addition to text messaging and visual voicemail. It also offers Internet services including e-mail, web browsing, and local Wi-Fi connectivity. User input is accomplished via a multi-touch screen with virtual keyboard and buttons.
The iPhone has been available since June 29, 2007 in the United States from Apple Retail Stores, the Apple Online Store, and from AT&T Mobility, formerly Cingular Wireless, for a contracted price of US$499 for the 4 GB model and US$599 for the 8 GB model.
Features
---------------------------------
Apple has released a video explaining many of iPhone's features through a series of demonstrations.
Touch screen
The 3.5 in liquid crystal display (320×480 px at 160 ppi) HVGA touch screen topped with optical-quality glass is specifically created for use with a finger, or multiple fingers for multi-touch sensing. Because the screen is a capacitive touch screen, no stylus is needed, nor can one be used. The requirement for bare skin to be used has caused concerns for users in areas with winter climates; gloves worn would then have to be removed to use the touchpad.
For text input, the device implements a virtual keyboard on the touchscreen. It has automatic spell checking, predictive word capabilities, and a dynamic dictionary that learns new words. The predictive word capabilities have been integrated with the dynamic virtual keyboard so that users will not have to be extremely accurate when typing—i.e. touching the edges of the desired letter or nearby letters on the keyboard will be predictively corrected when possible. The keys are somewhat larger and spaced further apart when in landscape mode (currently, only using Safari). Reviewers, writers and analysts have pointed out several areas in which the iPhone falls short. The virtual keyboard has been considered its chief weakness and a risk for Apple. David Pogue of The New York Times and Walt Mossberg of The Wall Street Journal both tested the iPhone for two weeks and found learning to use it initially difficult, although eventually usable. Pogue stated use was "frustrating" and "text entry is not the iPhone’s strong suit" but Mossberg considered the keyboard a "nonissue." Both found that the typo-correcting feature of the iPhone was the key to using the virtual keyboard successfully.
The iPhone varies from common desktop interfaces by using a direct manipulation model of scrolling. Where a typical desktop GUI achieves scrolling by using a scroll-arrow to push a view-window down and thus the content itself up (or the reverse, clicking up to move content down), the iPhone interface enables the user to move the content itself up or down by a touch-drag-lift motion of the finger, much as one would slide a playing card across a table. Additionally, the speed desired for scrolling is computed based on the speed and acceleration with which the drag motion is performed.
Scrolling through a long list works as if the list is pasted on the surface of a wheel: the wheel can be "spun" by sliding a finger over the display. After the finger is lifted from the display the wheel continues to "spin" for a short moment before coasting down. In this way, the iPhone seems to simulate the physics of a real object, which, it is thought, should give a natural feel to the whole process.
The user interface also features other visual effects, such as horizontally sliding sub-selections and co-selections from right and left, vertically sliding system menus from the bottom (e.g. favorites, keyboard), and menus and widgets that turn around to allow settings to be configured on their back sides.
The photo album and web page magnifications are examples of multi-touch sensing. It is possible to zoom in and out of objects such as web pages and photos by respectively "unpinching" and "pinching" them, that is, placing two fingers (usually thumb and forefinger) on the screen and moving them farther apart or closer together as if stretching or squeezing the image. This scaling is done uniformly and proportionally based on the image in question so there is no distortion of the image itself, as would be the case if the image were actually stretched or squeezed.
One disadvantage of multi-touch with regards to AJAX web sites is that there is no mechanism for 'hovering' over a UI element. That is, there is no separate paradigm for indicating interest or focus on a portion of a web control other than clicking on it.
The iPhone's touch interface has been compared by some media to the HTC Touch, which also features a touchscreen designed for fingers, although it can also be used with a stylus and lacks multi-touch.
Other inputs
The display responds to three sensors: a proximity sensor that shuts off the display and touchscreen when the iPhone is brought near the face to save battery power and to prevent spurious inputs from the user's face and ears, an ambient light sensor that adjusts the display brightness which in turn saves battery power, and a 3-axis accelerometer, which senses the orientation of the phone and changes the screen accordingly. Web browsing and music playing support three orientations, while videos play in only one widescreen orientation.
A single "home" hardware button below the display brings up the main menu. Subselections are made via the touchscreen. The iPhone utilizes a full-paged display, with context-specific submenus at the top and/or bottom of each page, sometimes depending on screen orientation. Detail pages display the equivalent of a "Back" button to go up one menu.
The iPhone has three physical switches on its sides: sleep / wake, volume up / down, ringer on / off. All other multimedia and phone operations are done via the touch screen.
Phone
The iPhone allows conferencing, call holding, call merging, caller ID, and integration with other cellular network features and iPhone functions. For example, a playing song fades out when the user receives a call. Once the call is ended the music fades back in.
The iPhone includes a Visual Voicemail feature in conjunction with AT&T which allows users to view a list of current voicemail messages on-screen, without having to call into their voicemail. Unlike most other systems, messages can be listened to in a non-chronological order, by choosing messages from an on-screen list. AT&T modified their voicemail infrastructure to accommodate this new feature designed by Apple.
SMS messages are presented chronologically in a mailbox format similar to Mail, which places all text from recipients together with replies. Text messages are displayed in speech bubbles (similar to iChat) under each recipient's name.
Camera
The iPhone features a built in 2.0 megapixel camera located on the back for still digital photos, but not video recording. It also includes software that allows the user to upload, view, and e-mail photos. The user zooms in and out of photos by "unpinching" and "pinching" them through the multi-touch interface. The software interacts with iPhoto on the Mac.
Multimedia
The layout of the music library differs from previous iPods, with the sections divided more clearly alphabetically, and with a larger font. Similar to previous iPods, the iPhone can sort its media library by songs, artists, albums, videos, playlists, genres, composers, podcasts, audiobooks, and compilations. The Cover Flow, like that on iTunes, shows the different album covers in a scroll-through photo library. Scrolling is achieved by swiping a finger across the screen.
Like the fifth generation iPods introduced in 2005, the iPhone can play video, allowing users to watch TV shows and films. Unlike other image-related content, video on the iPhone plays only in the landscape orientation, when the phone is turned sideways. A two-fingered tap is used to switch between the video's true wide-screen aspect ratio (with black bars on the top and bottom of the screen) and a zoomed mode (to fill the iPhone's screen).
Web connectivity
The iPhone has built-in Wi-Fi, with which it is able to access the World Wide Web (through a wireless network) via a modified version of the Safari web browser. The iPhone is also able to connect to the web through AT&T's EDGE network, but is not able to utilize AT&T's 3G/HSDPA network; Steve Jobs mentioned at the Keynote presentation that 3G support would be a future feature of a new version. The use of the EDGE network instead of 3G has been criticized by analysts. When the user is not in a Wi-Fi hot spot, the iPhone's network connection will use the older EDGE network, which, before the launch, reviewers found that the EDGE network was "excruciatingly slow," with the iPhone taking as long as 100 seconds to download the Yahoo! home page for the first time. Immediately before the launch the observed speed of the network increased to almost 200 kbit/s. This is probably due to the new "Fine EDGE" upgrades AT&T has been making to their network prior to the launch. There has also been some criticism stemming from the iPhone's inability to download iTunes content wirelessly.
The web browser displays full web pages as opposed to simplified pages as on most non-smartphones. The iPhone does not support Flash or Java technology. Web pages may be viewed in portrait or landscape mode and support automatic zooming by "pinching" or double-tapping images or text. The iPhone also has Bluetooth 2.x+EDR built in. It works with wireless earpieces that use Bluetooth technology.
An agreement between Apple and Google provides for access to a specially modified version of Google Maps—in map, local list, or satellite form, optimized for the iPhone, which also provides optional real-time traffic information. During the product's announcement, Jobs demonstrated this feature by searching for nearby Starbucks locations and then placing a prank call to one with a single tap. Google's ownership of YouTube means that viewing videos on the website can be achieved on the iPhone through a specialised application built into the system.
E-mail
The iPhone also features an HTML e-mail program, which enables the user to embed photos in an e-mail message. PDF, Microsoft Word, and Microsoft Excel attachments to mail messages can be viewed on the phone. Yahoo! is currently the only e-mail provider offering a free Push-IMAP e-mail service similar to that on a BlackBerry for the iPhone; IMAP and POP3 mail standards are also supported, including Microsoft Exchange. The iPhone will sync e-mail account settings over from Apple's own Mail application, Microsoft Outlook and Microsoft Entourage, or can be manually configured using the device's Settings tool. With the correct settings, the e-mail program can check many IMAP or POP3-enabled web based accounts such as Gmail, .Mac mail, and AOL.
OS X
Apple has confirmed that an optimized version of the Mac OS X operating system (without unnecessary components) runs on the iPhone, although differences between the operating system (OS X) running on Macs and the iPhone have not been officially explained. As iPhone's CPU is an ARM processor, the version of OS X that runs on iPhone differs from the desktop version in that code written in high-level programming languages is compiled to, and code written in assembly language is written in, instructions from the ARM instruction set architecture (ISA) instead of the x86 and PowerPC ISAs that the Mac version of OS X uses.
The operating system takes up about 700 MB of the device's total 4 or 8 GB storage. It will be capable of supporting bundled and future applications from Apple.
Apple intends to offer a smooth method for updating the iPhone's operating system, in a similar fashion to the way that Mac OS X and iPods are updated, and touts this as an advantage compared to other cell phones.
Widgets, similar to the ones available in Mac OS X v10.4's Dashboard, are included on the iPhone. They include Stocks and Weather widgets.
The iPhone's version of OS X includes the software component "Core Animation" which is responsible for the smooth animations used in its user interface. Core Animation has not yet been released for Macs, but will be part of Mac OS X v10.5.
The build of OS X on at least one iPhone is "OS X 1.0 (1A543a)", as seen in a crash log for the MobileMail application. The application apparently runs as the superuser.
Applications
There are several applications located on the "Home" screen. The YouTube application streams videos over Wi-Fi and/or EDGE after encoding them using QuickTime's H.264 codec, to which YouTube has converted about 10,000 videos. They are expected to convert the entire catalog by Fall 2007. As a result, the YouTube application on iPhone can currently only view a certain selection of videos from the site. Also, because YouTube displays videos using Flash, the iPhone can only view videos through the YouTube application as opposed to accessing the website using Safari.
At WWDC 2007 on June 11, 2007 Apple Inc. announced that the iPhone will support third party "applications" via the Safari web browser that share the look and feel of the iPhone interface. The applications must be created in Ajax or JavaScript to maintain device security. The iPhone cannot officially install full programs from anyone but Apple, although Steve Jobs has hinted that future third party applications are in development. Enthusiasts have demonstrated the possibility of unauthorized native code with a simple "Hello, World" program, as well as a fully functional terminal emulator.
Analysts also claim that iPhone lacks any type of firewall, which some experts claim is posing a data security risk. It is not confirmed by Apple or by independent analysts that used the actual device for tests that it doesn't have a firewall. Daniel Eran writes: "Dulaney doesn't know if the iPhone has a firewall, has no reason to suggest that its installation of OS X wouldn't offer a firewall, and offers no reasons why a mobile device would need a firewall anyway."
Platform support
The iPhone is compatible with Mac OS X version 10.4.10 or later, and 32-bit Windows XP or Vista. For each, the user must download the latest version of iTunes Version 7.3. The iPhone is not compatible with any 64-bit version of Windows such as Windows XP x64 or any 64-bit edition of Windows Vista.
Software updates
Apple has confirmed that software updates can be distributed to the iPhone device via iTunes. Security patches as well as new and improved features, such as a mobile chat client, Flash support, and voice recording, may be released in this fashion. The first iPhone software update was released on July 31, 2007.
Posted by
pkm
at
2:16 AM
0
comments
Saturday, August 11, 2007
Microformat
From Wikipedia, the free encyclopedia
In web development, a microformat (sometimes abbreviated μF or uF) is a way of adding simple semantic meaning to human-readable content which is otherwise, from a machine's point of view, just plain text. They allow data items such as events, contact details or locations, on HTML (or XHTML) web pages, to be meaningfully detected and the information in them to be extracted by software, and indexed, searched for, saved or cross-referenced, so that it can be reused or combined.
More technically, they are items of semantic mark up, using just standard (X)HTML with a set of common class-names. They are open and available, freely, for anyone to use.
Current microformats allow the encoding and extraction of events, contact information, social relationships, and so on. More are being developed. Version 3 of the Firefox browser, as well as version 8 of Internet Explorer are expected to include native support for microformats.
Principles
(X)HTML standards allow for semantics to be embedded and encoded within them. This is done using specific HTML attributes:
class
rel
rev
For example, 52.48,-1.89 is a pair of numbers which may be understood, from their context, to be a set of geographic coordinates. By wrapping them in spans (or other HTML elements) with specific class names (in this case part of the geo microformat specification):
<span class="geo"><span class="latitude">52.48</span>, <span class="longitude">-1.89</span></span>
machines can be told exactly what each value represents, and can then index it, look it up on a map, export it to a GPS device, etc.
Uses of microformats
-------------------------------------
Using microformats within HTML code provides additional formatting and semantic data that can be used by applications. These could be applications that collect data about on-line resources, such as web crawlers, or desktop applications such as e-mail clients or scheduling software.
Several browser extensions, such as Operator, provide the ability to detect microformats within an HTML document and export them into formats compatible with contact management and calendar utilities, such as Microsoft Outlook.
Microsoft expressed a desire to incorporate Microformats into upcoming projects; as have other software companies.
In Wikipedia - and more generally in MediaWiki - microformats are used as part of templates like {{coord}} for example.
Creation of microformats
----------------------------------------
Most of the existing microformats were created at the microformat wiki and associated mailing list, by a process of gathering examples of web publishing behaviour, then codifying it. Some other microformats (such as rel=nofollow and unAPI have been proposed, or developed, elsewhere.
Posted by
pkm
at
4:40 PM
0
comments
Intel Core 2
From Wikipedia, the free encyclopedia
The Core 2 brand refers to a range of Intel's mobile and desktop 64-bit dual-/quad-core x86 CPUs with the Core microarchitecture, which evolved from the 32-bit dual-core Yonah mobile processor. The Yonah comprised two interconnected single cores (the Pentium M branded microprocessor derivatives) coupled as a single die silicon chip (IC). The Core 2 marked a relegation of the Intel's Pentium brand to a lower-end market, and a reunification of Intel's notebook and desktop brand names, previously divided into the Pentium M and Pentium 4 lines.
The Core 2 brand was launched on July 27, 2006, comprising Duo (dual-core), Quad (quad-core), and Extreme (dual- or quad-core CPUs with higher speeds and unlocked multiplier) branches. The brand covers processors based on various cores; "Conroe" and "Allendale" (dual-core for higher- and lower-end desktop use, respectively), "Merom" (dual-core for notebooks), "Kentsfield" (quad-core for desktops), and their variants named "Penryn" (dual-core for notebooks), "Wolfdale" (dual-core for desktops) and "Yorkfield" (quad-core for desktops). Although the "Woodcrest", "Clovertown" and the upcoming "Tigerton" core CPUs for servers and workstations are also based on Core architecture, they are marketed under the Xeon brand. The first Core 2 Duo processors were fabricated on 300 mm wafers using a 65 nm manufacturing process.
Unlike the NetBurst architecture of Pentium 4 or Pentium D branded processors, the Core architecture does not stress extremely high clock speeds, but rather improvements in the processor's usage of both available clock cycles and power. This translated into more efficient decoding stages, execution units, caches, and buses, etc, reducing the Core 2 CPU's power consumption, while enhancing their processing capacity. With a TDP of up to only 65 W, the Core 2 dual-core Conroe consumed only half the power of some of the higher end dual-core Pentium D branded desktop chips with a TDP of up to 130 W (a high TDP requires many noisy cooling fans or a more expensive noiseless cooling system) and was more capable compared to them.
Intel Core 2 processors featured Intel 64 (also known as EM64T), Virtualization Technology (except T5500 or lower end E4x00), Execute Disable Bit, and SSE3. Core 2 also introduced SSSE3, Trusted Execution Technology, Enhanced SpeedStep, and Active Management Technology (iAMT2).
Typically for CPUs, the Core 2 Duo E4000/E6000, Core 2 Quad Q6600, Core 2 Extreme X6800, QX6700 and QX6800 CPUs were affected by bugs, but apparently minor.
Current processor cores
---------------------------------------------------------------------------------
Conroe
The first Intel Core 2 Duo processor cores, code-named Conroe and given the Intel product code 80557, were launched on July 27, 2006 at Fragapalooza, a yearly gaming event in Edmonton, Alberta, Canada. These processors are built on a 65 nm process and are intended for desktops, replacing the Pentium 4 and Pentium D. Intel has claimed that Conroe provides 40% more performance at 40% less power compared to the Pentium D. All Conroe processors are manufactured with 4 MiB L2 cache; however, for marketing purposes, the E6300 and E6400 versions based on this core have half their cache disabled, leaving them with only 2 MiB of usable L2 cache.
The lower end E6300 (1.86 GHz) and E6400 (2.13 GHz), both with a 1066 MT/s FSB, were released on July 27, 2006. Traditionally, CPUs of the same family with less cache simply have the unavailable cache disabled, since this allows parts that fail quality control to be sold at a lower rating. As yields improve, they may be replaced with versions that only have the cache amount needed on the die, to bring down manufacturing cost. At launch time, Intel's prices for the Core 2 Duo E6300 and E6400 processors were US$183 and US$224 each in quantities of 1000. Conroe CPUs have improved capabilities over previous models with similar processor speeds. According to reviews, the larger 4 MiB L2 cache vs. the smaller 2 MiB L2 cache at the same frequency and FSB can provide a 0–9% performance gain with certain applications and 0–16% performance gain with certain games. The higher end Conroe processors are labeled as the E6600 and E6700 Core 2 Duo models, with the E6600 clocked at 2.4 GHz and the E6700 clocked at 2.67 GHz. The family has a 1066 MT/s front side bus, 4 MiB shared L2 cache, and 65 watts TDP. These processors have been tested against AMD's current top performing processors (Athlon 64 FX Series), which were, until this latest Intel release, the fastest CPUs available. Conroe chips also experience much lower heat output compared to their predecessors — a benefit of the new 65 nm technology. At launch time, Intel's prices for the Core 2 Duo E6600 and E6700 processors were US$316 and US$530, respectively, each in quantities of 1000.
E6320 and E6420 Conroe CPUs at 1.86 and 2.13 GHz respectively were launched on April 22, 2007 featuring a full 4 MiB of cache and are considered Conroes.
Intel released four additional Core 2 Duo Processors on July 22nd, 2007. The release coincided with that of the Intel Bearlake (x3x) chipsets. The new processors are named Core 2 Duo E6540, E6550, E6750, and E6850. Processors with a number ending in "50" have a 1333 MT/s FSB. The processors all have 4 MiB of L2 cache. Their clock frequency is similar to that of the already released processors with the same first two digits (E6600, E6700, X6800). An additional model, the E6540, was launched with specifications similar to the E6550 but lacking Intel Trusted Execution Technology and vPro support. These processors are slated to compete with AMD's Stars processor line and are therefore priced below corresponding processors with a 1066 MT/s FSB.
Conroe XE
The Core 2 Extreme was officially released on July 29, 2006. However some retailers appeared to have released it on July 13, 2006, though at a higher premium. The less powerful E6x00 models of Core 2 Duo were scheduled for simultaneous release with the X6800, which are both available at this time. It is powered by the Conroe XE core and replaces the dual-core Pentium Extreme Edition processors. Core 2 Extreme has a clock speed of 2.93 GHz and a 1066 MT/s FSB, although it was initially expected to be released with a 3.33 GHz and 1333 MT/s. The TDP for this family is 75–80 watts. At full load the X6800 does not exceed 45 °C (113 °F), and with SpeedStep enabled the average temperature of the CPU when idle is essentially that of the ambient atmosphere.
At launch time, Intel's price for the Core 2 Extreme X6800 was US$999 each in quantities of 1000. Like the desktop Core 2 Duo, it has 4 MiB of shared L2 cache available. This means that the only major difference between the regular Core 2 Duo and Core 2 Extreme is the clock speed and unlocked multiplier, usual advantages of the "Extreme Edition." The unlocked upward multiplier is of use to enthusiasts which allow the user to set the clockspeed higher than shipping frequency without modifying the FSB unlike mainstream Core 2 Duo models which are downward unlocked only.
Allendale
There was contention as to whether the previously-available low-end Core 2 Duo desktop processors (E6300, at 1.86 GHz and E6400, at 2.13 GHz, both with 2 MiB L2 cache) are specimens of the Allendale core. Prior to Q1 2007, all E6300 and E6400 processors released were Conroe (4 MiB L2 cache) cores with half their L2 cache disabled. The Allendale core, manufactured with 2 MiB L2 cache in total, offers a smaller die size and therefore greater yields.
Quoted from The Tech Report:
You'll find plenty of sources that will tell you the code name for these 2 MB Core 2 Duo processors is "Allendale," but Intel says otherwise. These CPUs are still code-named "Conroe," which makes sense since they're the same physical chips with half of their L2 cache disabled. Intel may well be cooking up a chip code-named Allendale with 2 MB of L2 cache natively, but this is not that chip.
Another difference between the premium E6000 series (Conroe core) or (Allendale core) and the E4000 series (Allendale core) is the front side bus clock rating. The E4000 series are rated to run on a quad-pumped 200 MHz front side bus ("800 MT/s") while the E6000 series are rated to run on a quad-pumped 266 MHz front side bus ("1066 MT/s"). The E4000 series also lack support for Intel VT-x instructions.
The currently available Core 2 Duo E4300 only uses an Allendale core, released on January 21, 2007. The Allendale processors use a smaller mask with only 2 MiB of cache, thereby increasing the number of chips per wafer. Allendale processors are produced in the LGA775 form factor, on the 65 nm process node. It is unclear and a matter of contention whether the E6300 and E6400 models are still Conroe processors with half their L2 cache disabled or Allendale processors. It is possible that the E6300 and E6400 models can be both Allendale and Conroe, differentiated by the L2 and B2 steppings respectively.
Initial list price per processor in quantities of one thousand for the E4300 was US$163. A standard OEM price was US$175, or US$189 for a retail package. Price cuts were enacted on April 22, 2007, when the E4400 was released at $133 and the E4300 dropped to $113. Allendale processors with half their L2 cache disabled were released in mid-June 2007 under the Pentium Dual-Core brand name.
On July 22nd, 2007, an E4500 Allendale was launched, phasing out the E4300 model. This was accompanied by a price cut for the E4400 model.
Merom
Merom, the first mobile version of the Core 2, was officially released on July 27, 2006 but quietly began shipping to PC manufacturers in mid-July alongside Conroe. Merom is Intel's premier line of mobile processors, with largely the same features as Conroe, but with more emphasis on low power consumption to enhance notebook battery life. Merom-based Core 2 Duo provides 20% more performance yet maintains the same battery life as the Yonah-based Core Duo. Merom is the first Intel mobile processor to feature Intel 64 architecture.
The first version of Merom is "drop-in" compatible with Napa platform for Core Duo, requiring at most a motherboard BIOS update. It has a similar thermal envelope of 34 W and the same 667 MT/s FSB rate. Merom features 4 MiB L2 cache (budget T5xxx models have only 2 MiB L2 cache).
A second wave of Merom processors featuring an 800 MT/s FSB and using the new Socket P was launched on May 9, 2007. These chips are part of Santa Rosa platform. Low voltage versions were also released on May 9, 2007.
Merom (מרום) is the Hebrew word for a higher plane of existence or a level of heaven, BaMerom (במרום) means "in the heavens". The name was chosen by the Intel team in Haifa, Israel, who designed this processor.
See the Merom section of "List of Intel Core 2 microprocessors" for a list of Merom processors.
Kentsfield
The Kentsfield was the first Intel desktop quad core CPU branded as Core 2 (and Xeon for lower-end servers and workstations). The top-of-the-line Kentsfields were Core 2 Extreme models numbered QX6xx0, while the mainstream ones branded Core 2 Quad were numbered Q6xx0. All of them featured two 4 MB L2 caches. The mainstream Core 2 Quad Q6600, clocked at 2.4 GHz, was launched on January 8, 2007 at US$851 (reduced to US$530 on April 7, 2007, and to US$266 on July 22, 2007). July 22, 2007 marked the release of the next Core 2: Quad Q6700 and Extreme QX6850 Kentsfields at US$530 and US$999 respectively, and also price reduction of Core 2: Quad Q6600 and Extreme QX6800 Kentsfields to US$266 and US$999 respectively.
Kentsfield, like the Pentium D Presler, comprised two separate silicon dies. Each of Kentsfield's two dies was dual-core with the Core architecture, as did each die constituting alone every Core 2's dual-core only CPU. Hence, the max. power consumption (TDP) of the Kensfield (QX6800 - 130 watts, QX6700 - 130 W,Q6600 - 95 W) was approx. double of its similarly clocked Core 2 Duo counterpart. For example, the QX6700 consisted of two E6700 chips connected together by a 1066 MT/s FSB on one MCM, resulting in lower costs but less bandwidth to the northbridge. The Kentsfield was one socket processor sitting in a LGA775 socket, as well as Core 2 Duo (AMD Quad FX consisted of two dual-core processors in two separate sockets on one motherboard with a 2 x 125 W= 250 W TDP).
A quad-core CPU, like the Kentsfield, processes very well with multi-threaded applications (typical for video editing, ray-tracing, or rendering), where its processing ability may approach double that of each of its halves comprising the equally clocked dual-core CPU. Similarly, Pentium D Presler had two dice in one package. A two-die CPU, however, can rarely double the processing ability of each of its constituent halves (e.g. the Kentsfield rarely doubles the ability of the Conroe), due to a loss of performance resulting from connecting them (i.e. sharing the narrow memory bandwidth, and operating system overhead of handling twice as many cores and threads).
Single or dual-threaded applications alone, including most games, do not benefit from the second pair of cores of a quad-core CPU over an equally clocked dual-core CPU. For example, with no increase in FSB speed and a mild reduction in processor frequency of the quad-core Extreme QX6700 over the older dual-core Extreme X6800, overall performance of the Kentsfield (QX6700) for those applications does not improve. Nevertheless, the simultaneous use of several processor-intensive single/dual-threaded applications on a quad-core CPU will generally lead to a dramatic overall performance increase over an equally clocked dual-core CPU. A quad-core CPU is useful also to run the both client and server processes of a game without noticeable lag in either thread, as each instance (up to four) could be running on a different core.
Kentsfield XE
The first Kentsfield, named Core 2 Extreme QX6700 (product code 80562) and clocked at 2.67 GHz, was released on November 2, 2006 at US$999. It was the first x86 quad-core processor ever, featured the Kentsfield XE core, and complemented the Core 2 Extreme X6800 dual-core processor based on the Conroe XE core. The CPUs with the Kentsfield XE core had the highest and unlocked multipliers like their Extreme predecessors. On April 8, 2007, a new top Kentsfield XE - the Core 2 Extreme QX6800 - was released within the 135 W TDP thermal envelope, and clocked at 2.93 GHz. It went to high end OEM-only systems at US$1,199. On July 22, 2007, the new champ Core 2 Extreme QX6850 arrived, clocked at 3.0 GHz, with a faster 1.33 GHz FSB, and at US$999 - a typical price for a top Kentsfield XE CPU.
The formerly available Core 2 Extreme QX6700 was relaunched on July 22nd, 2007 as the Core 2 Quad Q6700, clocked at 2.66 GHz, but it consumes less power than QX6700. The price of the Q6600 has been dropped to US$266 on July 22nd, 2007.
Posted by
pkm
at
12:54 AM
0
comments